Browse all practice questions for the PSA Airlines Canadair Regional Jet Systems (PSA-CRJ) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

PSA Airlines Canadair Regional Jet Systems (PSA-CRJ) Practice Exam course image
APU SOV OPEN: How to confirm the fuel shutoff valve is open during a ground start on the PSA-CRJDuring an APU ground start, which message indicates that the APU SOV is open?Both loops can independently detect fire on the PSA-CRJ: what that means for safety and reliabilityWhich statement about the dual loop fire detection system is true?Discover the Essential Role of the Bleed Air System in AircraftWhat is the primary purpose of the bleed air system in the aircraft?Discover which battery discharges when powering NAV lights with the DC Service switchWhich battery is discharged if the DC Service switch is left on while powering the NAV lights?How many hydraulic systems power the CRJ rudder and why redundancy mattersHow many hydraulic systems are typically used to power the rudder?How to Navigate RTU Failures in PSA-CRJ SystemsIn the event of an RTU failure on the First Officer's side, how can the #2 radios be tuned?How TOGA Thrust Changes CRJ Engine and GLD System BehaviorWhat occurs when any thrust lever is advanced to TOGA?Let’s Explore the Importance of MDA Settings in AviationWhat must be considered when setting a MDA using the air data reference panel?Mastering the Minimum Rate of Climb in PSA-CRJ AircraftDuring a climb with IAS mode active, what is the minimum rate of climb?Maximizing Thrust with APR Activation During Engine FailureWhat happens to the thrust if APR is activated during engine failure on takeoff?The Essential Role of the APU in Aircraft SystemsWhat is the consequence of the APU primarily supplying electrical power?Understanding APU Generator Output in PSA Airlines Canadair Regional JetsWhat is the rated output of the APU generator?Understanding APU Operations on the Canadair Regional JetCan the APU be started using external ground power?Understanding Autopilot Engagement for the Canadair Regional JetTo engage the autopilot, what is required?Understanding Bleed Air Systems in Canadair Regional JetsIs it true or false that the 6th stage bleed air is solely used for air-conditioning, while the 10th stage is for anti-ice and thrust reversers?Understanding Fuel Temperature Requirements for Canadair Regional Jet TakeoffAt what fuel temperature is takeoff prohibited?Understanding How PSA Airlines Canadair Regional Jet Ejectors OperateThe Main, Scavenge, and Transfer ejectors are powered by what?Understanding How PSA Airlines Determines the Best Bleed Source for PerformanceHow does the system determine which bleed source to utilize for optimal performance?Understanding Hydraulic Pumps in the PSA CRJ: Essential Knowledge for Single Engine TaxiingDuring single engine taxiing, which hydraulic pumps are operational in normal conditions?Understanding the 120 Amp Rating of PSA Airlines Canadair Regional Jet Transformer Rectifier UnitsEach TRU is rated at how many Amps?Understanding the AUTO XFLOW INHIBIT Message in CRJ SystemsWhat is indicated when the AUTO XFLOW INHIBIT message appears?Understanding the Battery Master Switch and A/C Power Timelines in PSA-CRJWhat is the time limit to establish A/C power after selecting the Battery Master on?Understanding the Bleed Valve Selector Settings in PSA CRJ AircraftWhen the BLEED VALVE selector is in AUTO with the anti-ice off, what is the bleed air source on the ground and in flight, respectively?Understanding the Components of the Integrated Drive GeneratorWhat does the Integrated Drive Generator (IDG) consist of?Understanding the Critical Role of the Engine Fire Push Switch in Safety OperationsWhat happens when the Engine Fire Push switch is activated?Understanding the Fuel Motive Flow in PSA-CRJHow is the motive flow for center tank fuel achieved?Understanding the Functions of TOGA Buttons Before TakeoffWhat happens when the TOGA buttons are pressed prior to takeoff?Understanding the Green "AVAIL" Light on the CRJ-700/900 APUWhat does the green "AVAIL" light signify after starting the APU on the CRJ-700/900?Understanding the Hydraulic System Pressure in the Canadair Regional JetWhat is the normal operating pressure of the hydraulic systems?Understanding the Impact of AC Bus Failure on TRUs in PSA Airlines SystemsA fault resulting in the loss of AC Bus 1 will affect how many TRUs?Understanding the Impact of Leaving the DC Service Switch On OvernightWhat happens if the DC Service switch is left on overnight?Understanding the Impact of the DC Service Switch on the APU BatteryWhat does the APU battery deplete if the DC Service switch is left on?Understanding the Importance of the Fuel Check Valve in the CRJWhat does the Fuel Check Valve check ensure during pre-flight inspections?Understanding the Master Caution and Master Warning Systems in PSA CRJ CockpitsWhat happens when the Master Caution or Master Warning switch is pressed?Understanding the Maximum Airspeed for Canadair Regional Jet Windshield WipersWhat is the maximum airspeed at which the windshield wipers can be operated?Understanding the Minimum Fuel Level Requirements for the Transfer Ejector ValveWhat is the minimum wing tank fuel level required for the transfer ejector valve to open?Understanding the N1 Gauge and Its Role in the CRJ-700 Engine CompressorWhich stage of the engine compressor references the N1 gauge on the CRJ-700?Understanding the Role of Rechargeable Batteries in PSA Airlines Emergency Lighting SystemsEmergency lights are powered from which type of batteries?Understanding the Role of the Data Concentrator Unit (DCU) in PSA-CRJ Aircraft SystemsWhat is the primary function of the Data Concentrator Unit (DCU)?Understanding the Role of the Lamp Driver Unit in Aircraft SystemsWhat is the function of the Lamp Driver Unit (LDU)?Understanding the Weight on Wheels Condition for Flight Data Recorder ActivationWhat condition is needed, alongside switch selection, to activate the Flight Data Recorder?Understanding When the Cockpit Voice Recorder Starts RecordingWhen does the Cockpit Voice Recorder (CVR) begin recording?Understanding When to Select DME Hold During FlightWhen must DME Hold be selected during flight?What Happens When the Bi-Directional Crossflow Pump Fails?What is the effect of a failure in the bi-directional crossflow pump?What is the maximum altitude a Canadair Regional Jet can reach and whyWhat is the maximum altitude at which the aircraft can operate?What signals indicate auto tune readiness for navigation radios on PSA‑CRJ: white needles show it’s readyWhat is required for the navigation radios to be selected to Auto tune?
More practice questions

These questions are part of the practice quiz. Start practicing

  • How is fuel heated before entering the engine?
  • What is the minimum battery voltage required to start the APU?
  • What does TCAS stand for?
  • What action should be taken if an unexpected warning related to bleed air is triggered?
  • The bleed air valves displayed on the ECS and A/ICE synoptic pages indicate what?
  • What component protects each generator from over/under voltage and frequency?
  • What is the power priority for AC BUS 2?
  • What occurs if the LAV smoke detectors are not tested during the fire test?
  • What happens to the inboard brakes if hydraulic system 3 is lost?
  • Which probe is not heated while the aircraft is on the ground?
  • Which part of the aircraft controls flap deployment speed during operation?
  • Which of the following statements about the navigation system is incorrect?
  • Which of the following statements regarding the EICAS Control Panel is true during a failure?
  • Are all the doors displayed on the Doors Synoptic page located within the pressure vessel?
  • What happens when both channels of the left FADEC fail?
  • Will the nose wheel steering be operative after a manual gear extension?
  • Where can the Emergency Evacuation information be found?
  • If the cowl anti-ice switch is turned ON with the APU as the bleed air source, what caution message appears?
  • How long can the Taxi lights operate when the aircraft is stationary?
  • What designates the Primary EICAS display in case of a failure?
  • During engine starting, which statement is NOT true?
  • What must occur for a brake temperature readout to change from red?
  • From which power source are fire protection items powered?
  • What is the normal hydraulic reservoir quantity displayed on the Synoptic page?
  • What is necessary for the CRJ to complete ground maneuvers efficiently?
  • When ED-1 fails, which page defaults to display?
  • What prevents the landing gear lever from being moved to the up position during weight on wheels?
  • How do the cargo bottles discharge when activated?
  • Which system component manages abnormal engine starts?
  • How are flaps connected to the Flap PDU?
  • True or False: Landing light lenses are diffused while Taxi Lights are clear.
  • In an emergency situation, what is one limitation on the operation of emergency lights?
  • If the position disagrees by more than how many NM from the last known position by the FMS, a message displays?
  • When does the Flight Data Recorder (FDR) start recording?
  • When is continuous ignition automatically activated in the CRJ?
  • What happens to airflow when smoke is detected in the AFT Cargo Bay?
  • Can an erroneous oral warning be silenced by turning off the speaker button on the Audio Control?
  • What radios can the Backup Tuning Unit (if installed) tune?
  • The DCUs provide information to which of the following systems?
  • Which engine temperature is monitored by the N1 gauge in the CRJ-700?
  • Is it true that the navigation radios cannot be selected to AUTO tune when DME hold is selected?
  • To navigate using the FMS, which of the following statements is true?
  • What role does the Flap PDU serve in flap operations?
  • What condition must be detected by both loops in the dual loop fire detection system to indicate a fire?
  • Which system features a single-loop fire detection without fire protection?
  • How much pavement is needed for a 180° turn in the CRJ 900?
  • What provides the static source used by the CPAM?
  • Do the Spoilerons and Flight Spoilers operate in tandem on the applicable side?
  • Above what altitude is the use of slats and flaps prohibited?
  • In order to perform an ILS using standby instruments, what condition must be met?
  • Bleed air for pneumatic services in the CRJ is extracted from which stages of the engine compressor?
  • What do the green lights next to the mode selection buttons on the Flight Control Panel indicate?
  • Upon pressing the Master Caution switch, what is the immediate consequence?
  • What is the maximum load allowed on the Passenger door?
  • Which of the following functions does bleed air serve in the CRJ?
  • What is the minimum time interval between attempts to start the APU?
  • What does the trend vector on the airspeed tape represent?
  • What type of lights are limited to a specific duration of operation when the aircraft is stationary?
  • What is the lowest N2 setting commanded by FADEC for idle?
  • When should Powered Crossflow be activated according to the Fuel Control Computer?
  • What is the maximum load that the Air Driven Generator can handle?
  • Under what condition does the APU automatically shut down with a fire indication?
  • What is the minimum altitude for deploying flight spoilers?
  • What visual indication appears on the radio altimeter when setting a DH?
  • How long can emergency lights provide lighting?
  • Why is the operating time limited when only battery power is available on the ground?
  • What does a red chevron indicate during an aircraft upset?
  • Which of the following results occurs if the engine fire system is functioning properly?
  • From where is fuel supplied to the APU?
  • If the Flight Director (FD) is not engaged and the autopilot button is pressed, what occurs?
  • Which component commands the YAW DAMPERS to prevent Dutch Roll?
  • What does the red AP/SP button on the control take do in addition to disconnecting the autopilot?
  • How do pilots typically regain generator power after an ADG deployment?
  • What type of information does the Flight Mode Annunciator (FMA) provide?
  • What happens when the TOGA buttons are pressed prior to takeoff?
  • What limits the functionality of the EICAS on the ground with battery power?
  • In which position must the hydraulic pump 3B switch be for it to be powered when the ADG deploys?
  • What is required to display TCAS on the MFD?
  • What component is primarily responsible for the extension of slats?
  • In flight, when will the AC Utility buses automatically load-shed?
  • What conditions are necessary for hydraulic pump 1B and 2B to operate during flight?
  • How are the bleed valves controlled and operated?
  • In the event of an engine failure during takeoff, which thrust is commanded on the operating engine?
  • What is the minimum amount of pavement required for a 180° turn in the CRJ 700?
  • Which EICAS messages are typically associated with a voice message?
  • What happens if the Aft Equipment Bay door becomes unlatched in flight?
  • Does the APU bleed air duct contain a one-way check valve to prevent engine bleed air backup?
  • Which of the following indicates that the APU generator is ready for electrical loading?
  • Which of the following is true about the landing and taxi light lenses?
  • What must the pilot do after deploying the ADG to restore the AC ESS Bus?
  • What happens during cruise flight at FL300 if there is an EDP failure with hydraulic switches in the AUTO position?
  • What activates the Flight Data Recorder?
  • What is the function of a fuel/oil heat exchanger in CRJ systems?
  • Which component is critical for transferring fuel from the wing tank to the center tank?
  • True or False: The Lamp Driver Unit receives input from the DCU's to illuminate switch lights for EICAS messages.
  • What is the regulated discharge pressure for the pressure regulating shut off valves (PRSOV) in the CRJ-700?
  • At what airspeeds must flight spoilers not be extended during flight?
  • What is the capacity of the Aft Equipment Bay door regarding its hinge direction?
  • How many electric outflow valves does the CRJ-700/900 have?
  • What is the airspeed limit when the APU door is failed open and the APU is not operating?
  • How is stabilizer trim adjusted?
  • What is the result when the PM selects the Speed button after the PF calls for speed mode during climb?
  • In the event of a bleed air failure, which component typically would receive priority for bleed air supply?
  • When starting the APU in flight, the APU door opens based on which factors?
  • Which hydraulic system normally supplies the pressure for the landing gear operation?
  • What triggers the bungee breakout mechanism to transfer control of multifunction spoilers?
  • What is CPAM's role in relation to the DCU's regarding cautions and warnings?
  • What happens in the event of a single flap motor failure?
  • What happens to the Ice Detector probes when icing conditions are met?
  • Does the wing anti-ice cross-bleed system allow one engine to provide anti-ice protection to both wings?
  • Who has priority over the Public Address (PA) system?
  • The DC service switch connects the DC SERV BUS to which of the following?
  • What is the primary purpose of the bleed air valves in the aircraft?
  • What powers ignition A in the AC essential bus system?
  • Is it possible to heat both engine cowls using just one engine?
  • What condition must be met for the GLD's to automatically deploy?
  • Which hydraulic systems must be available to lower the nose landing gear?
  • What is the power output rating of the CRJ-700/900 TRUs?
  • When are Ice Detector probes activated for heating?
  • What causes the APU to shut down when the STOP/START switch light is selected?
  • What is the other weight condition that activates the shutdown of Powered Crossflow?
  • What status message indicates the fuel service panel is switched on?
  • What is the primary and secondary purpose of the APU?
  • What does the absence of a starter cutout indicate during engine starting?
  • If the bi-directional crossflow pump fails, what is the alternative method to balance fuel?
  • How many TRUs are present on the CRJ-700/900, and what is their power rating?
  • At what cabin altitude will passenger oxygen masks deploy according to CRJ systems?
  • When are landing gear indications removed from EICAS?
  • What are the heating settings for the windshields when the windshield heat switch is in high position?
  • Which statement is true regarding the operation of the navigation radios?
  • Which is true about the fire bottle discharge process in cargo areas?
  • Under which conditions is the windshield heat set to low?
  • The two batteries are capable of supplying emergency power for approximately how many minutes?
  • Which buttons remain functional during an EICAS Control Panel failure?
  • What is the maximum altitude at which the APU can be started?
  • How can one switch from the active to standby pressure controller on the ECS page?
  • What is the effect of pressing both TOGA buttons during a takeoff sequence?
  • What does the Captain's EMER/NORM switch do when selected to the EMER position on the Audio Control Panel?
  • When do slats extend in relation to flaps during operation?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy